fig2

Figure 2. Mechanical designs for the shape distortion of additive manufactured soft materials. (A) Schematic of the rezoning technique in the dynamic element method simulation of SLA-printed parts^[47]. (B) Schematic and experiment result of the deformation of a two-layer resin laminate^[40]. (C) Comparison of the simulated geometry with the printed samples and the target geometry with the printed samples for a T3-shape^[49]. (D) Coarse-grained molecular dynamics simulation of continuous liquid interface production and dependence of the shape and radius of the object on the printing speed^[52]. (E) Part distortions occurring during the material adding process^[57]. (F) Warpage in the FDM (Fused Deposition Modeling) process and warpage evaluation^[55].