fig6

Soft materials for wearable supercapacitors

Figure 6. (A) Digital photograph of a flexible FGH thin film electrode. (B) low- and (C) high- magnification SEM images of interior microstructures of the FGH film. (D) Digital photograph of an FGH-based flexible solid-state supercapacitor. (E) A schematic diagram of the solid-state device with H2SO4-PVA polymer gel as the electrolyte and separator. (F) Cyclic voltammetry (CV) curves at 10 mV s-1 of the FGH-based flexible solid-state supercapacitor at different bending angles. (G) One cycle of galvanostatic charge-discharge (GCD) curves at 1 A g-1 of a three-supercapacitor in-series group. The inset shows a photograph of a green LED turned on by the tandem device[61].

Soft Science
ISSN 2769-5441 (Online)
Follow Us

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/